甲烷浓度对碳化硅基底金刚石薄膜摩擦性能影响

利用热丝化学气相沉积法(HFCVD)在碳化硅基底上制备金刚石薄膜,采用场发射扫描电子显微镜、拉曼光谱仪、原子力显微镜研究了在不同甲烷浓度条件下制备的金刚石薄膜表面形貌及物相组成,在干摩擦条件下通过往复式摩擦磨损实验测试并计算了已制备金刚石薄膜的摩擦系数和磨损率,结合物相分析及摩擦磨损实验结果分析了甲烷浓度的改变对金刚石薄膜摩擦磨损性能的影响。结果表明,由于甲烷气体含量的升高,金刚石薄膜结晶质量下降,薄膜由微米晶向纳米晶转变。摩擦磨损实验结果显示:3%甲烷浓度条件下制备的金刚石薄膜耐磨性较好,磨损率为2.2×10^-7 mm³/mN;5%甲烷浓度条件下制备的金刚石薄膜摩擦系数最低(0.032),磨损率为5.7×10^-7 mm³/mN,制备的金刚石薄膜的耐磨损性能相比于碳化硅基底(磨损率为9.89×10^-5 mm³/mN)提升了两个数量级,显著提高了碳化硅基底的耐磨性。     

One-pot two step synthesis of unsymmetrically substituted indenes from 3,4-diarylbutadiene sulfones

A new one-pot two step synthesis of unsymmetrically substituted indenes from available 3,4-diarylbutadiene sulfones involves SO₂ thermal extrusion followed by acid- catalyzed cyclization of the diene formed, the cyclization proceeding selectively at the more electron-rich aryl rings. The procedure is efficient for substrates bearing donor, acceptor, as well as bulky substituents.     

Metal Nodes of Metal-Organic Frameworks can Activate Molecular Hydrogen

Hydrogenation of multiple bonds are among the most general and important organic reactions. Typical heterogeneous catalysts are based on transition metal nanoparticles, including noble metals. Data are presented here showing that metal nodes of MIL-101(Cr) and UiO-66 in the absence of occluded metal nanoparticles can promote hydrogenation of polarized X=Y double bonds of nitro and carbonyl groups. The catalytic activity is a function of the composition of the metal node and the organic linker. It is proposed that the reaction mechanism is based on the operation of frustrated Lewis acid/base pairs.     

Dipropargyl ethers possessing nitramine units

The syntheses and characterization of novel propargyl ethers of N-(hydroxymethyl)nitramines that contain from one to four nitramine units are reported. All nitramine-functionalized ethers were well characterized by IR and multinuclear NMR spectroscopy as well as CHN analysis, and the X-ray crystal structures of two of them are described. For ethers bearing two or three nitramine units, the standard molar enthalpies of formation at 298.15 K were determined from the experimental standard molar energies of combustion in oxygen measured by static bomb combustion calorimetry     

氮掺杂石墨烯负载单原子Zr催化CO2加氢的密度泛函理论研究

基于密度泛函理论计算,研究了H2和CO2在氮掺杂石墨烯负载单原子Zr催化剂(Zr Nx-Gr)上的吸附和CO2催化加氢反应. H2和CO2在Zr N3-Gr上单独吸附的吸附能分别为-0.49和-2.17 e V,在H2和CO2共吸附状态下,吸附能为-2.24 e V,均高于在Zr N4-Gr表面的吸附能,表明Zr N3-Gr表面更利于CO2加氢反应的发生.在Zr N3-Gr表面, CO2在共吸附后保持了其单独吸附时的特性,削弱了H2分子的吸附. CO2在Zr Nx-Gr表面催化加氢反应起始于H2和CO2的共吸附构型,沿反式HCOOH路径形成甲酸盐(HCOO*)中间体,然后HCOO*基团吸附H原子形成反式甲酸,在Zr N3-Gr和Zr N4-Gr表面该路径的反应能垒分别为1.85和2.48 e V.另一路径为产生CO与H2O的反应,在Zr N3-Gr和Zr N4-Gr表面的反应能垒分别为1.86和1.73 e V,表明Zr N3-Gr更利于CO2加氢生成甲酸反应的发生,而Zr N4-Gr表面更利于CO的产生.     

Methane Oxidation over Cu2+/[CuOH]+ Pairs and Site-Specific Kinetics in Copper Mordenite Revealed by Operando Electron Paramagnetic Resonance and UV/Visible Spectroscopy

Cu-exchanged mordenite (MOR) is a promising material for partial CH₄ oxidation. The structural diversity of Cu species within MOR makes it difficult to identify the active Cu sites and to determine their redox and kinetic properties. In this study, the Cu speciation in Cu-MOR materials with different Cu loadings has been determined using operando electron paramagnetic resonance (EPR) and operando ultraviolet-visible (UV/Vis) spectroscopy as well as in situ photoluminescence (PL) and Fourier-transform infrared (FTIR) spectroscopy. A novel pathway for CH₄ oxidation involving paired [CuOH]⁺ and bare Cu²⁺ species has been identified. The reduction of bare Cu²⁺ ions facilitated by adjacent [CuOH]⁺ demonstrates that the frequently reported assumption of redox-inert Cu²⁺ centers does not generally apply. The measured site-specific reaction kinetics show that dimeric Cu species exhibit a faster reaction rate and a higher apparent activation energy than monomeric Cu²⁺ active sites highlighting their difference in the CH₄ oxidation potential.     

How Doping Affects the Activity of the Aluminum Oxide Support

The performance of heteronuclear clusters [AlXO₃]⁺ (X=Al, AlO₄, AlMg₂O₂, AlZnO, AlAu₂, Mg, Y, VO, NbO, TaO) in activating methane has been explored by a combination of high–level quantum calculations with reported and supplementary gas-phase experiments. With different dopants in [AlXO₃]⁺, the mechanism, reactivity and selectivity towards methane activation varies accordingly. The classic HAT competes with PCET, depending on the composition of intramolecular interactions. Although the existence of terminal oxygen radical is beneficial for classic HAT, the Al_t−C interaction in the [AlXO₃]⁺ clusters as enhanced by the strongly electronegative doping groups (X=Al, AlZnO, Mg, Zn, VO, NbO, TaO) favors the PCET process, facilitating C−H bond breaking. In addition, with different dopants, the destiny of the split methyl group varies accordingly. While strong interaction between Al_t and CH₃ results in the formation of the Al_t−C bond, dopants with variable valance may promote the formation of deep-oxidation products like formaldehyde. It has been discussed in detail how to regulate the activity and selectivity of the active center of the catalyst via rational doping.     

载体材料对单Pd三效催化剂性能及催化活性的影响

采用共沉淀法制备了耐高温高比表面的La₂O₃-Al₂O₃(LA)以及铈含量分别为15%、33%和47%的储氧材料CeO₂-ZrO₂-La₂O₃-Al₂O₃(CZLA)、CeO₂-ZrO₂-La₂O₃+La₂O₃-Al₂O₃(CZL+LA)和CeO₂-ZrO₂-La₂O₃(CZL)₄类载体材料,并用浸渍法制备了整体式Pd/LA、Pd/CZLA、Pd/CZL+LA和Pd/CZL汽油车尾气净化三效催化剂,考察了载体材料对单Pd三效催化剂的影响。采用低温N₂吸附-脱附、H₂-程序升温还原(H₂-TPR)以及X射线光电子能谱(XPS)对载体材料及催化剂进行了表征,并考察了催化剂的空燃比性能和三效催化性能。结果表明,CZLA有效地结合了铈基和铝基载体材料的优点,表现出了优异的织构性能、热稳定性及还原性能。老化前后,其负载的单Pd三效催化剂在低温还原率、表面元素含量及Pd的电子结合能等性能方面表现出了最小的差异。催化剂活性测试结果表明,Pd/CZLA的三效窗口明显较宽,且拥有最低的起燃温度,尤其经1000℃老化处理后,其催化活性最高,C₃H₈、NO_x和CO的起燃温度分别为370、257和223℃。可见,相较于其他3种载体材料,CZLA更适合于负载单Pd三效催化剂,从而满足更高标准的三效催化剂的性能要求。     

两种功能化纳米金粒子固酶电极的催化性能

以合成的4-巯基苯甲酸功能化纳米金粒子和聚乙烯基吡啶包覆纳米金粒子分别作为固酶载体,制备了2种新型固酶电极,在此基础上组装了2种酶燃料电池。采用电化学方法结合紫外可见分光光度法、透射电镜技术等手段研究了固酶载体的形貌,酶-载体间相互作用对电极表面固定酶分子的光谱学性质,酶-电极间直接电子迁移能力和催化底物反应性能的影响,进一步评估和比较了两种酶燃料电池的能量输出性能。实验结果表明：4-巯基苯甲酸功能化纳米金粒子固酶基电极可以实现酶-电极间的直接电子迁移而且对葡萄糖和氧气具有良好的催化性能(催化反应起始电位分别为-0.03和0.96 V,底物转化频率分别是1.3和0.5 s^-1),其催化性能的重现性、长期使用性能、酸碱耐受性和热稳定性良好,随着自组装固酶层数的增加,催化性能随之增强直至达到极限催化电流;电池性能测试结果表明4-巯基苯甲酸功能化纳米金粒子固酶基燃料电池的开路电压为0.88 V,最大输出能量密度：864.0 μW·cm^-2,长期使用性能优异(储存3 周后仍可达到最佳能量输出的80%以上)。     

基于5-磺酸基间苯二甲酸钠和双三唑烷烃的Cu(Ⅱ)配合物的合成、结构和性质

利用5-磺酸基间苯二甲酸钠(NaH₂sip)和双三唑烷烃,合成了3个配合物[Cu_0.5(btm)(H₂O)](H₂sip)·H₂O}_n(1,btm=双三唑甲烷),{[Cu(btp)₂(H₂sip)(H₂O)](NO₃)·4H₂O}_n(2,btp=双三唑丙烷)和{[Cu(btb)₂(Hsip)]_n(3,btb=双三唑丁烷)。化合物1为一维双链结构;化合物2为二维四方网络结构,多个二维层依次叠加形成三维超分子结构;化合物3也具有二维层状结构,其中金属铜离子和双三唑丁烷构成的一维双链结构经双齿μ₂-Hsip^2-配体连接构成了二维层状结构。同时对配合物的热稳定性和顺磁共振特性进行了讨论。